Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Motronic Engine Control Module (ECM) -J220-
Página 24 de 26
24-185
Adaption
learned values have been erased
Indicated on display:
- Press button.
Rapid data transfer
Select function XX
HELP
Indicated on display:
- Press buttons -0- and -4- for
function "Initiate basic setting"
and confirm entry with -Q- button.
Basic setting
Input display group number XXX
Indicated on display:
- Press buttons -0-, -6- and -0- for
"Display group number 60" and
confirm entry with -Q- button.
System in basic setting 60
xxx.x % xxx.x % x ADP. runs
Indicated on display: (1 to 4
display zones)
After pressing the -Q- button the
throttle valve positioner is switched
so that it is not supplied with
voltage.
In this condition the throttle valve is
pulled into an emergency running
position by a mechanical spring in
the Throttle Valve Control Module -
J338-. The values that both angle
sensors provide in the emergency
running position are stored by the
Motronic Engine Control Module
(ECM) -J220-.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=...
12/2/2005