14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Flush-bonded windows<br />

Página 36 de 36<br />

minimum curing time may be achieved.<br />

Window Vehicle Window<br />

adhesive<br />

Windshields<br />

with and without DA 004 600 A2<br />

airbag<br />

Side windows and rear<br />

windows<br />

Minimum curing<br />

time<br />

3 hours<br />

Minimum curing time is time from applying components up<br />

to vehicle use. During this time, vehicle must stand on an<br />

even surface at room temperature (at least 15 C).<br />

Warning!<br />

Vehicle is operationally ready only after this waiting<br />

time has elapsed.<br />

<strong>Repair</strong>ing paint damage<br />

Paint construction must be re-established according to<br />

specifications of <strong>Repair</strong> Manual "Paint" .<br />

Following repair method applies to paint damage in an area<br />

which is not visible:<br />

- Paint twice (wet on wet) using Glass/paint primer D 009<br />

200 02 - minimum air drying time 10 minutes.<br />

Adhesive sealing material, cleaning off<br />

surplus<br />

- Adhesive removal solution D 002 000 10 is recommended<br />

cleaning solution. Observe safety precautions when<br />

processing.<br />

Warning!<br />

When cleaning from vehicle interior out, window just<br />

installed must not be pressed outward.<br />

- First, clean coarse paint surfaces with a dry cloth.<br />

Remove further material using Adhesive removal solution D<br />

002 000 10 .<br />

- Clean plastic trim: Allow adhesive sealing material to<br />

harden (about 1 hour) and then peel off.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

13/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!