14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ABS system components for front and rear axles, removing and installing<br />

Página 26 de 36<br />

45-90<br />

- Strip 15 mm (5/8 in.) of insulation<br />

from end of wire with wire stripper<br />

and fold half of stripped wire<br />

back.<br />

- Guide in new speed sensor<br />

wiring.<br />

- Connect speed sensor to speed<br />

sensor wiring.<br />

- Clip in speed sensor wiring<br />

(arrow).<br />

Make sure the wiring is not twisted<br />

when installing the speed sensor<br />

wiring in the wheel housing.<br />

- Cut 2-pin connector off new<br />

speed sensor wiring with wire<br />

stripper pliers.<br />

- Strip 15 mm (5/8 in.) of insulation<br />

from end of wire with wire<br />

strippers and bend back half.<br />

- Connect speed sensor wiring with<br />

aid of suitable crimp connector<br />

from wiring harness repair set<br />

VAS 1978.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!