Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Front drive axle, servicing
Página 27 de 61
2. Outer constant velocity joint
◦ Replace as a unit
◦ Removing 40-5, Removing
outer constant velocity joint
◦ Installing: Using a plastic
hammer, drive onto shaft as
far as the stop
◦ Checking 40-5, Outer
constant velocity joint,
checking
◦ Greasing 40-5,
3. Hex bolt
◦ Tightening 40-5, Installing
◦ Any paint residue and/or
corrosion on thread of outer
joint must be removed before
nut is installed.
◦ Always replace
4. Outer constant velocity joint
◦ For special models
"GolfGTI132kW" and "R32"
◦ Replace as a unit
◦ Removing 40-5, Removing
outer constant velocity joint
◦ Installing: Using a plastic
hammer, drive onto shaft as
far as the stop
◦ Checking 40-5, Outer
constant velocity joint,
checking
◦ Greasing 40-5,
5. Circlip
◦ Always replace
◦ Insert in shaft groove
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
12/2/2005