14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Brake pedal - assembly overview<br />

Página 9 de 12<br />

46-85<br />

Preparation<br />

- Remove driver's side lower instrument panel<br />

cover.<br />

- Disconnect electrical connector from brake light<br />

switch.<br />

- Identify style of switch installed:<br />

"Old style" switch is identified by large (approx.<br />

10 mm) plunger tip button, and square plunger<br />

shaft. Removing and installing/adjusting<br />

below.<br />

"New style" switch is identified by small<br />

(approx. 4 mm) plunger tip without button, and<br />

round plunger shaft. Removing and installing<br />

Page 46-87 .<br />

"Old style" brake light switch, removing and<br />

installing/adjusting<br />

Note:<br />

The following applies only to an existing,<br />

functional "old style" switch that is removed and<br />

reinstalled/adjusted.<br />

Removing<br />

- Turn switch counter-clockwise 90 .<br />

- Pull switch out from retainer mounting hole.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!