Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Description of work (part 2 of 2)
Página 50 de 59
Check the following:
- With the low beam switched on check whether the
horizontal light-dark border of the setting line - 1 - contacts
the test surface.
- Check whether the break-away point - 2 - between the left
horizontal part and the rising part on the right of the lightdark
border runs vertically through the center point - 3 - .
The bright core of the light beam must be on the right of the
vertical line.
Note:
To make it easier to find break-away point - 2 - cover and
uncover left half of headlight (as viewed when looking
forward) a few times. Then check low beam again.
After correct adjustment of low beams the center point of
the main beam must lie on the center mark - 3 - .
For the previous test screen with 15 -setting line, adjust
as for new test screen. To avoid incorrect settings, ignore
15 setting line.
Other additional headlights:
Accessory auxiliary headlight systems must be checked
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
13/2/2005