14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview<br />

Página 39 de 44<br />

- Remove plugs from trailing arm - 3 - and tighten<br />

tensioning strap .<br />

1 - Support arm of lifting platform<br />

2 - Tensioning strap T10038 ; The vehicle must be fastened<br />

with the tensioning straps on left and right side.<br />

Tightening bearing bracket is only possible, when the<br />

measured value - a - from the middle of wheel hub to<br />

lower edge bordering wheel housing is reached.<br />

- Turn wheel hub until one of the holes for the wheel bolts is<br />

at the 12 o'clock position.<br />

- Install wheel hub support T10149 with a wheel bolt.<br />

- Raise wheel bearing housing using engine/transmission<br />

jack until dimension - a - is reached.<br />

Caution!<br />

• Do not raise or lower the vehicle if the<br />

engine/transmission jack is under the vehicle.<br />

• Do not leave engine/transmission jack under the<br />

vehicle longer than necessary.<br />

- Tighten bolts from bearing bracket to rear axle with<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!