14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Brake pressure regulator, assembly overview<br />

Página 3 de 5<br />

47-30<br />

Checking and adjusting pressure<br />

Note:<br />

The brake pressure regulator is set with the<br />

vehicle unladen 1) .<br />

- Lift vehicle and connect the pressure gauges to<br />

left front brake caliper and to right rear wheel<br />

cylinder/caliper.<br />

- Bleed both gauges.<br />

- Lower vehicle and bounce rear of vehicle<br />

several times.<br />

- Press brake pedal and measure pressures.<br />

- Compare figures attained with specifications,<br />

Page 47-31 , and if necessary adjust.<br />

1) The term "unladen" means: The weight of the<br />

vehicle ready for the road which has a:<br />

Driver's weight of 75 kg (165.34 lb).<br />

Full fuel tank.<br />

Spare wheel, vehicle tool kit and jack installed to<br />

relevant stowage points on vehicle.<br />

The fluid reservoir for the windshield/headlight<br />

washer system must be full.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!