14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview<br />

Página 26 de 44<br />

Make sure when setting the tools that the recess is on the<br />

milled side T10254/3 - arrow - of press piece T10254/2 - 4 -<br />

is correctly positioned.<br />

1. Nut T10254/4 with Spindle T10254/5<br />

2. Press piece T10254/1<br />

3. Bonded rubber mounting<br />

4. Press piece T10254/3<br />

5. Hydraulic press VAS 6178<br />

Make sure there is sufficient clearance when tightening.<br />

- Draw in rubber mounted bushing.<br />

- Secure upper control arm at trailing arm with new nut and<br />

bolt.<br />

- Install shock absorber to trailing arm<br />

- Installing spring:<br />

Removing and installing spring<br />

and installing .<br />

42-4, Spring, removing<br />

Removing and installing spring R32 42-4, Spring R32,<br />

removing and installing<br />

Tightening bearing bracket is only possible from below,<br />

when measured value - a - from the middle of wheel<br />

hub to lower edge bordering wheel housing is reached.<br />

- Turn wheel hub until one of the holes for the wheel bolts is<br />

at the 12 o'clock position.<br />

- Install wheel hub support T10149 with a wheel bolt.<br />

- Raise steering knuckle using engine/transmission jack<br />

until dimension - a - is reached.<br />

Caution!<br />

• Do not raise or lower the vehicle if the<br />

engine/transmission jack is under the vehicle.<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!