14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Front drive axle, servicing<br />

Página 18 de 61<br />

Installing boot for constant velocity joint (right drive axle)<br />

The vent chamber - A - must seat on tube.<br />

B - Vent hole<br />

Tightening clamp on outer CV joint boot<br />

- Install tightening clamp V.A.G 1682 as shown in<br />

illustration. Make sure that the jaws of the tension clamp<br />

seat in the corners - arrows B - of the hose clip.<br />

- Tighten hose clamp by turning the spindle with a torque<br />

wrench (do not bend tensioning clamp).<br />

Note:<br />

• Due to he hard material of the joint boot (compared to<br />

rubber) makes it necessary to use a stainless steel<br />

hose clamp, it is only possible to tighten the hose<br />

clamp with clamping device V.A.G1682 .<br />

• Tightening torque: 25 Nm<br />

• Use torque wrench - C - with a range of 5 to 50 Nm<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!