14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Trailing arm and transverse links (all-wheel drive vehicles), assembly overview<br />

Página 3 de 44<br />

◦ Installation position was<br />

modified: bolt head points<br />

opposite direction of travel<br />

5. Hex bolt M 12 x 1.5 x 75<br />

◦ Always replace<br />

6. Upper transverse link<br />

◦ Removing and installing 42-<br />

5, Transverse link, removing<br />

and installing<br />

◦ Different versions<br />

◦ From model year 2003 is<br />

installed a trailing arm with an<br />

adjusting hole to adjust<br />

camber<br />

◦ Application See Parts<br />

Catalog<br />

7. Ball joint<br />

◦ Check rubber boots for<br />

damage and cracks<br />

◦ Removing and installing 42-<br />

5, Upper ball joint/bonded<br />

rubber bushing, removing and<br />

installing<br />

Starting from model year 2004 a<br />

bonded rubber bushing is<br />

inserted in place of the ball joint.<br />

If the ball joint must be replaced,<br />

then a new bonded rubber<br />

bushing and a new upper<br />

transverse link Item - 6 - must<br />

be inserted above.<br />

At the same time the ball joint<br />

Item - 20 - and lower transverse<br />

link Item - 19 - must be<br />

replaced.<br />

The replacement of the ball<br />

joints by the bonded rubber<br />

bushing must be done on both<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

12/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!