14.02.2016 Views

Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Rear doors<br />

Página 6 de 23<br />

- Disconnect multi-pin connector below rubber boot - 3 - of<br />

B-pillar.<br />

- Pry off cap - 2 - using screwdriver.<br />

- Remove bolt - 1 - from upper hinge.<br />

Tightening torque: 13 Nm<br />

- remove lower bolt - 4 - from hinge.<br />

Tightening torque: 20 Nm + 1 / 4<br />

turns (90<br />

) turn<br />

Note:<br />

This bolt must always be replaced.<br />

- Lift out door upward from angle hinge.<br />

Door, adjusting<br />

For proper door adjustment, door hinge must be loosened<br />

at pillar. Other measures, such as aligning door upward,<br />

are not effective. Excess pressure thereafter will again<br />

cause door to sag.<br />

For this, Door adjusting wrench 3320 with Box spanner<br />

3320/2 must be used.<br />

If it should be necessary that door hinge must be loosened<br />

at B-pillar from inside, Socket insert 3410 can be used. To<br />

do so, lower B-pillar trim must be removed<br />

<strong>Repair</strong> Manual, Body Interior, <strong>Repair</strong> Group 70, Pillar<br />

and side trim<br />

.<br />

Door handle and door lock, assembly<br />

overview<br />

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...<br />

13/2/<strong>2005</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!