Bentley Volkswagen.Golf.Jetta.R32.Official.Factory.Repair.Manual.1999-2005

Battery, disconnecting and reconnecting
Página 5 de 13
27-43
Battery, reconnecting
Special tools and auxiliary items
needed
VAG 1331 Torque wrench (or
equivalent 5 - 50 Nm )
Notes:
In order to prevent damage to
the battery housing, battery
terminals must be placed on
battery posts without using force
(by hand only).
Battery posts and terminals must
no longer be greased.
- Refit battery positive ( B+ )
terminal on battery positive post.
- Torque positive ( B+ ) terminal
clamp fastener to 6 Nm.
- Fit fuse holder onto battery and
install positive bus onto securing
pins on battery positive terminal.
- Engage fuse holder clip in battery.
- Tighten securing bolt -1- for
positive bus on positive ( + )
terminal clamp.
- Connect cables to strip fuses and
tighten securing bolts -A-.
Note:
Refer to appropriate wiring diagram
for installed positions of cables to
fuses if necessary.
- Refit electrical connection -2-.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
13/2/2005