Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Next adjust the

Next adjust the tolerances in the configuration files as shown below. Click on the CFG icon from the tool bar to access the settings VISI Mould - Cooling Channel Layout Now import the cooling layout This function allows the user to import cooling schematics into a file. The layout for the moving half has been pre-designed for your convenience and now we can import it. Click on the Import icon from the tool bar to import the file. Browse for the file MH-Cooling.nct If you are unsure ask the tutor where this can be found. The application point for the cooling layout is shown below. 0 .nct is the default file extension for cooling channels The cooling channel history is now loaded into the tree. Remember to split and adapt the cooling channels. Vcamtech Co., Ltd 12

VISI Mould - Cooling Channel Layout Now use your knowledge and refer to the Fixed Half Cooling example to produce the following details on the moving half: - Cooling Diameter = 6mm Add the Z81 hose connectors as shown. Vcamtech Co., Ltd 13