Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

Wireframe > Draw Edges

Wireframe > Draw Edges VISI Modelling – Core Modification Using this operation we will create the peripheral edges of the modified surfaces as wireframe geometry. We will then use these new curves to cut the core model. It is then possible to remove the faces no longer required on the core model and replace them with the yellow modified surfaces. Ensure that the ‘Select all peripheral edges of a sheet body’ icon is selected Select the body to create the curves – Select the yellow modified surfaces All peripheral edges are created Analysis > Split Body Select the body to split – Select the core model Select the splitting elements – Select All geometry Accept the splitting tolerance Select all peripheral edges of a sheet body Select the yellow modified surfaces Vcamtech Co., Ltd 7

6 sheet bodies will be created VISI Modelling – Core Modification With the core model now split, it is possible to remove the faces that will be replaced using the yellow modified surfaces To rebuild the core solid model with the new surfaces it is only a case of uniting all remaining core surfaces (pink) with the modified surfaces (yellow) Operation > Unite Delete these faces (Blue) from the core model. Select the first target body – Select any pink core surface Select the tool (sheet) bodies – Select all elements (only surfaces can be selected) Result of the deleted surfaces Accept the default knitting tolerance Congratulations, a new core SOLID model will be generated and the colour of the modified faces will be maintained. This completes the ‘Core Modification’ tutorial. Vcamtech Co., Ltd 8

YT-1200 - YOUNG TECH Co., Ltd.