vero uk training material - VCAM TECH Co., Ltd

Recommendations

Info

Add 4 x ‘O’ rings to the vertical channels as shown below: - Note: - Apply the ‘O’ rings to the lower vertical channels. Finally add the Plugs to the open ends of the remaining Channels. VISI Mould - Cooling Channel Layout Vcamtech Co., Ltd 14
Now activate all the layers on the model Subtracting the Channels VISI Mould - Cooling Channel Layout The last task we need to perform is to subtract all the cooling channels from the model to create actual holes. To do this, follow the next steps: - Apply the subtraction on all the solids in the model. Cooling holes removed from solid. Click twice on this icon to Reset the layer list, making all layers active. Select All. This will detect all the cavities to be removed. With the cooling circuits completed the next stage is to make some 2D drawings and details of the tool. Vcamtech Co., Ltd 15
Page 1 and 2:
VERO UK TRAINING MATERIAL Draft Ana
Page 3 and 4:
Start by opening the workfile: - VI
Page 5 and 6:
VISI Modelling - Draft Analysis ‘
Page 7 and 8:
9 1 2 VISI Modelling - Draft Analys
Page 9 and 10:
Modelling > Draft Faces Select refe
Page 11 and 12:
Analysis > Draft Analysis Select th
Page 13 and 14:
VISI Modelling - Draft Analysis NOT
Page 15 and 16:
VISI Modelling - Draft Analysis Usi
Page 17 and 18:
Analysis > Draft Analysis Select th
Page 19 and 20:
VISI Modelling - Draft Analysis 5.
Page 21 and 22:
From within the split line manager
Page 23 and 24:
VERO UK TRAINING MATERIAL Splitting
Page 25 and 26:
Start by opening the relevant workf
Page 27 and 28:
VISI Modelling - Splitting 8. SEARC
Page 29 and 30:
Select the direction - Select the Z
Page 31 and 32:
VISI Modelling - Splitting Note! If
Page 33 and 34:
VISI Modelling - Splitting At this
Page 35 and 36:
VERO UK TRAINING MATERIAL Game Cont
Page 37 and 38:
Start by opening the workfile: - Fi
Page 39 and 40:
VISI Modelling - Core Modification
Page 41 and 42:
Select the Create a new layer icon
Page 43 and 44:
6 sheet bodies will be created VISI
Page 45 and 46:
Objectives VISI Mould - Tool Build
Page 47 and 48:
Setting the Tool Options VISI Mould
Page 49 and 50:
Delete the Insulation Plate from th
Page 51 and 52:
Adjust the Ejection side plate dime
Page 53 and 54:
Location Ring VISI Mould - Tool Bui
Page 55 and 56:
Cap Head screws VISI Mould - Tool B
Page 57 and 58:
Adjust Guide Pillar Lengths, Guidin
Page 59 and 60:
VISI Mould - Tool Build Tutorial To
Page 61 and 62:
Objectives VISI Mould - Tool Build
Page 63 and 64:
VISI Mould - Tool Build Tutorial No
Page 65 and 66:
Select the Z30 screw from the Fixin
Page 67 and 68: VISI Mould - Tool Build Tutorial Yo
Page 69 and 70: Now your turn - Quick Exercise - In
Page 71 and 72: VISI Mould - Tool Build Tutorial No
Page 73 and 74: The Result - Shows the Register Rin
Page 75 and 76: Inserting Ejector Pins (Hasco Z41 )
Page 77 and 78: VISI Mould - Tool Build Tutorial No
Page 79 and 80: Inserting Sub Gate Ejector 2 VISI M
Page 81 and 82: Objectives VISI Mould - Inserting L
Page 83 and 84: The display should look like the on
Page 85 and 86: Next select the stroke direction fo
Page 87 and 88: The Result VISI Mould - Inserting L
Page 89 and 90: VISI Mould - Inserting Lifters Now
Page 91 and 92: Objectives VISI Mould - Slide Assem
Page 93 and 94: Create the Slide body VISI Mould -
Page 95 and 96: The Result VISI Mould - Slide Assem
Page 97 and 98: VISI Mould - Slide Assembly Creatio
Page 105 and 106: Objectives VISI Mould - Cooling Cha
Page 107 and 108: VISI Mould - Cooling Channel Layout
Page 109 and 110: There should now be 14 channels in
Page 111 and 112: Check the diameter of the cooling c
Page 117: VISI Mould - Cooling Channel Layout
Page 121 and 122: Objectives VISI Mould - Creating Mo
Page 123 and 124: VISI Mould - Creating Mould Tool Do
Page 133 and 134: Numbering the Items using table mod
Page 137 and 138:
VISI Mould - Creating Mould Tool Do
Page 139 and 140:
Page 141 and 142:
show all

vero uk training material - VCAM TECH Co., Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?