vero uk training material - VCAM TECH Co., Ltd
vero uk training material - VCAM TECH Co., Ltd
vero uk training material - VCAM TECH Co., Ltd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Quick Exercise – Screw In the Register Ring<br />
VISI Mould - Tool Build Tutorial<br />
Now we have located the Register Ring onto the top plate of the Mould Tool, it needs to<br />
fixed into position with 2 x M5 Socket Head Cap Screws. This is your task; remember to<br />
refer to the previous exercises if you are unsure of how to do this.<br />
Application Points (Absolute)<br />
The Result – Side View<br />
Use a Z30 screw from the tab menu of the<br />
HASCO library.<br />
Pick the Register Ring as the<br />
start plate.<br />
Pick the K11 Top Plate as the<br />
End plate.<br />
X0, Y40, Z0<br />
X0, Y-40, Z0<br />
Check Layer is set to TOP<br />
Change the diameter to 5<br />
and body length to 16.<br />
Check “Through Hole”.<br />
be<br />
Here are the Z30 screw parameters. For this<br />
task we are using a 5 x 16 screw and due to<br />
the depth of the screw and the plate thickness<br />
we will create the screw with a through hole<br />
Screw Parameters<br />
Vcamtech <strong>Co</strong>., <strong>Ltd</strong> 14
Change language