vero uk training material - VCAM TECH Co., Ltd

Screwing the Inserts to the K20 plates
VISI Mould - Tool Build Tutorial
Our next task is to screw the Fixed Half Insert and the Moving Half Insert into their
respective K20 bolster plates
Set the Layer list to display only the 4 layers shown
Follow the next sequence to add the screws: -
You will now be presented with the lower docked dialog screen for catalogue / component
choice.
Pick on the “Suppliers” icon and
select “Hasco” from the available
pop-up list.
Make sure the CAV layer is the current layer.
Select Standard Element from the Mould drop down
Now select the “Fixing” tab to display the list of fixing components, as shown below.
Vcamtech Co., Ltd 4