vero uk training material - VCAM TECH Co., Ltd

Recommendations

Info

VISI Mould - Inserting Lifters Here are the parameters for these 2 lifters, use the values shown in the diagrams below. Parameters for the lifter The Result - The lifter and cavity shown here. Vcamtech Co., Ltd 8
VISI Mould - Inserting Lifters Now repeat the task for the 1 remaining lifter to achieve a result similar to that shown below. Final Result – Please note no cavities are shown on this image. Congratulations you have successfully inserted the 4 lifters required for this mould tool design. In the next section we will focus on inserting Slides / Side Cores. Vcamtech Co., Ltd 9
Page 1 and 2:
VERO UK TRAINING MATERIAL Draft Ana
Page 3 and 4:
Start by opening the workfile: - VI
Page 5 and 6:
VISI Modelling - Draft Analysis ‘
Page 7 and 8:
9 1 2 VISI Modelling - Draft Analys
Page 9 and 10:
Modelling > Draft Faces Select refe
Page 11 and 12:
Analysis > Draft Analysis Select th
Page 13 and 14:
VISI Modelling - Draft Analysis NOT
Page 15 and 16:
VISI Modelling - Draft Analysis Usi
Page 17 and 18:
Analysis > Draft Analysis Select th
Page 19 and 20:
VISI Modelling - Draft Analysis 5.
Page 21 and 22:
From within the split line manager
Page 23 and 24:
VERO UK TRAINING MATERIAL Splitting
Page 25 and 26:
Start by opening the relevant workf
Page 27 and 28:
VISI Modelling - Splitting 8. SEARC
Page 29 and 30:
Select the direction - Select the Z
Page 31 and 32:
VISI Modelling - Splitting Note! If
Page 33 and 34:
VISI Modelling - Splitting At this
Page 35 and 36:
VERO UK TRAINING MATERIAL Game Cont
Page 37 and 38: Start by opening the workfile: - Fi
Page 39 and 40: VISI Modelling - Core Modification
Page 41 and 42: Select the Create a new layer icon
Page 43 and 44: 6 sheet bodies will be created VISI
Page 45 and 46: Objectives VISI Mould - Tool Build
Page 47 and 48: Setting the Tool Options VISI Mould
Page 49 and 50: Delete the Insulation Plate from th
Page 51 and 52: Adjust the Ejection side plate dime
Page 53 and 54: Location Ring VISI Mould - Tool Bui
Page 55 and 56: Cap Head screws VISI Mould - Tool B
Page 57 and 58: Adjust Guide Pillar Lengths, Guidin
Page 59 and 60: VISI Mould - Tool Build Tutorial To
Page 61 and 62: Objectives VISI Mould - Tool Build
Page 63 and 64: VISI Mould - Tool Build Tutorial No
Page 65 and 66: Select the Z30 screw from the Fixin
Page 67 and 68: VISI Mould - Tool Build Tutorial Yo
Page 69 and 70: Now your turn - Quick Exercise - In
Page 73 and 74: The Result - Shows the Register Rin
Page 75 and 76: Inserting Ejector Pins (Hasco Z41 )
Page 79 and 80: Inserting Sub Gate Ejector 2 VISI M
Page 81 and 82: Objectives VISI Mould - Inserting L
Page 83 and 84: The display should look like the on
Page 85 and 86: Next select the stroke direction fo
Page 87: The Result VISI Mould - Inserting L
Page 91 and 92: Objectives VISI Mould - Slide Assem
Page 93 and 94: Create the Slide body VISI Mould -
Page 95 and 96: The Result VISI Mould - Slide Assem
Page 97 and 98: VISI Mould - Slide Assembly Creatio
Page 105 and 106: Objectives VISI Mould - Cooling Cha
Page 107 and 108: VISI Mould - Cooling Channel Layout
Page 109 and 110: There should now be 14 channels in
Page 111 and 112: Check the diameter of the cooling c
Page 119 and 120: Now activate all the layers on the
Page 121 and 122: Objectives VISI Mould - Creating Mo
Page 123 and 124: VISI Mould - Creating Mould Tool Do
Page 133 and 134: Numbering the Items using table mod
Page 137 and 138:
VISI Mould - Creating Mould Tool Do
Page 139 and 140:
Page 141 and 142:
show all

vero uk training material - VCAM TECH Co., Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?