Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Mould - Inserting

VISI Mould - Inserting Lifters Here are the parameters for these 2 lifters, use the values shown in the diagrams below. Parameters for the lifter The Result - The lifter and cavity shown here. Vcamtech Co., Ltd 8

VISI Mould - Inserting Lifters Now repeat the task for the 1 remaining lifter to achieve a result similar to that shown below. Final Result – Please note no cavities are shown on this image. Congratulations you have successfully inserted the 4 lifters required for this mould tool design. In the next section we will focus on inserting Slides / Side Cores. Vcamtech Co., Ltd 9

YT-1200 - YOUNG TECH Co., Ltd.