vero uk training material - VCAM TECH Co., Ltd

Recommendations

Info

Creating the Pockets For The Inserts VISI Mould - Tool Build Tutorial Before we add any more components to the mould we need to create pockets in both the K20 plates, to house the inserts. To do this, follow the next sequence: - Use the layer manager to display the layer list and activate only the layers shown below. Firstly, lets cavity the pocket-solid away from the CAV plate, by doing this we will retain a copy of the pocket solid, but create the pocket hollow in CAV. Select the Cavity function from the pullout tool bar or Operation > Cavity 1.Select Target Body(CAV) 2.Select Cavity Body Leave Offset for cavity at ‘0’ and select OK CORE Vcamtech Co., Ltd 2 CAV POCKET-SOLID NOTE: - Pocket solid is a pre-made solid that is saved with the tutorial eliminating the need to create a solid at this stage.
VISI Mould - Tool Build Tutorial Now we need to Subtract the pocket solid from plate CORE. This operation will delete the pocket solid and leave the resultant pocket in CORE. Select the Subtract function from the pullout tool bar or Operation > Subtract 2.Select Tool Body 1.Select Target Body The Result - Sectioned view for illustration purposes shows both pockets for the inserts. Now turn on all the layers with the SET/RESET icon in the layer manager as shown below. Vcamtech Co., Ltd 3
Page 1 and 2:
VERO UK TRAINING MATERIAL Draft Ana
Page 3 and 4:
Start by opening the workfile: - VI
Page 5 and 6:
VISI Modelling - Draft Analysis ‘
Page 7 and 8:
9 1 2 VISI Modelling - Draft Analys
Page 9 and 10:
Modelling > Draft Faces Select refe
Page 11 and 12: Analysis > Draft Analysis Select th
Page 13 and 14: VISI Modelling - Draft Analysis NOT
Page 15 and 16: VISI Modelling - Draft Analysis Usi
Page 17 and 18: Analysis > Draft Analysis Select th
Page 19 and 20: VISI Modelling - Draft Analysis 5.
Page 21 and 22: From within the split line manager
Page 23 and 24: VERO UK TRAINING MATERIAL Splitting
Page 25 and 26: Start by opening the relevant workf
Page 27 and 28: VISI Modelling - Splitting 8. SEARC
Page 29 and 30: Select the direction - Select the Z
Page 31 and 32: VISI Modelling - Splitting Note! If
Page 33 and 34: VISI Modelling - Splitting At this
Page 35 and 36: VERO UK TRAINING MATERIAL Game Cont
Page 37 and 38: Start by opening the workfile: - Fi
Page 39 and 40: VISI Modelling - Core Modification
Page 41 and 42: Select the Create a new layer icon
Page 43 and 44: 6 sheet bodies will be created VISI
Page 45 and 46: Objectives VISI Mould - Tool Build
Page 47 and 48: Setting the Tool Options VISI Mould
Page 49 and 50: Delete the Insulation Plate from th
Page 51 and 52: Adjust the Ejection side plate dime
Page 53 and 54: Location Ring VISI Mould - Tool Bui
Page 55 and 56: Cap Head screws VISI Mould - Tool B
Page 57 and 58: Adjust Guide Pillar Lengths, Guidin
Page 59 and 60: VISI Mould - Tool Build Tutorial To
Page 61: Objectives VISI Mould - Tool Build
Page 65 and 66: Select the Z30 screw from the Fixin
Page 67 and 68: VISI Mould - Tool Build Tutorial Yo
Page 69 and 70: Now your turn - Quick Exercise - In
Page 71 and 72: VISI Mould - Tool Build Tutorial No
Page 73 and 74: The Result - Shows the Register Rin
Page 75 and 76: Inserting Ejector Pins (Hasco Z41 )
Page 77 and 78: VISI Mould - Tool Build Tutorial No
Page 79 and 80: Inserting Sub Gate Ejector 2 VISI M
Page 81 and 82: Objectives VISI Mould - Inserting L
Page 83 and 84: The display should look like the on
Page 85 and 86: Next select the stroke direction fo
Page 87 and 88: The Result VISI Mould - Inserting L
Page 89 and 90: VISI Mould - Inserting Lifters Now
Page 91 and 92: Objectives VISI Mould - Slide Assem
Page 93 and 94: Create the Slide body VISI Mould -
Page 95 and 96: The Result VISI Mould - Slide Assem
Page 97 and 98: VISI Mould - Slide Assembly Creatio
Page 105 and 106: Objectives VISI Mould - Cooling Cha
Page 107 and 108: VISI Mould - Cooling Channel Layout
Page 109 and 110: There should now be 14 channels in
Page 111 and 112: Check the diameter of the cooling c
Page 113 and 114:
VISI Mould - Cooling Channel Layout
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Now activate all the layers on the
Page 121 and 122:
Objectives VISI Mould - Creating Mo
Page 123 and 124:
VISI Mould - Creating Mould Tool Do
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Numbering the Items using table mod
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
show all

vero uk training material - VCAM TECH Co., Ltd

Create successful ePaper yourself

Delete template?

Save as template?