Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Modelling – Draft

VISI Modelling – Draft Analysis 10. IMPRINT SEGMENT This function allows a segment to be imprinted between two chosen points on any selected face(s). It is necessary to specify the direction in which the segment will be imprinted. The imprinted edges are managed as Split Line edges, and therefore visible in the split line tree 11. UNMARK BODIES This function will delete all edges belonging to the Split Line list. 12. UNMARK FACES This function will remove the Split Line edges belonging to the selected face(s). 13. ANALYSE EDGES This function will display the edges of the Split Line result in the tree-view 14. ANALYSE FACES This function will display the resultant faces split with the user defined split line in the treeview. If only two face sets are present, the splitting simulation can be run using the slider bar. To activate the graphical simulation it is necessary to view the face sets in shaded mode. It is possible to shade the face sets by clicking them with the right hand mouse button and selecting the shading option from the menu. Moving the slider bar will perform the simulation of the component splitting. 15. APPLY and COLOUR This function exits from the Split Line manager and confirms the result of the analysis. Any face sets will be coloured accordingly. Re running the Split Line function will read all the edges that were previously created and show them in the tree. 16. DRAW SPLIT LINE This function will exit from the Split Line manager and produce the split line as wireframe geometry. 17. SPLIT This function will exit from the Split Line manager and physically split and colour the solid body using the user defined split line Vcamtech Co., Ltd 19

From within the split line manager select the Imprint Shadow option Select the body to analyse – Select the solid model Select this body to analyse Select the direction – Select the Z axis (confirm using RHM) VISI Modelling – Draft Analysis The result of the analysis should now be visible within the split line tree. To activate the tree it is necessary to press the ESC key. Selecting any edge set inside the tree will highlight the edge set within the CAD screen. Selecting any edge using the right hand mouse button will display the following menu : Using these options it is possible to remove a set from the list, remove all other sets from the list and also to zoom directly on the highlighted set. Vcamtech Co., Ltd 20

YT-1200 - YOUNG TECH Co., Ltd.