vero uk training material - VCAM TECH Co., Ltd
vero uk training material - VCAM TECH Co., Ltd
vero uk training material - VCAM TECH Co., Ltd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VISI Mould - Tool Build Tutorial<br />
Pick the Start Plate and End plate for the Ejector Pin and then the application point.<br />
<br />
End Plate MH-SUB1<br />
Start Plate EJE5<br />
Now insert the Ejector Pin parameters as shown<br />
Change the destination layer to UPP.<br />
Select an Ejector Diameter of 4mm.<br />
Ejector Pin Parameters.<br />
Make sure the Guiding<br />
Length parameter is 29.<br />
Ejector Pin Shown in Position<br />
Use the application coordinate<br />
shown above<br />
Vcamtech <strong>Co</strong>., <strong>Ltd</strong> 16