Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Modelling –

VISI Modelling – Splitting Selecting this option will activate the edge selection. To join the two open sets together it is necessary to select the edges that will connect the two sets together. During the selection process, it is also possible to select existing edges (redundant) and these will be removed from the tree. New connecting edge Redundant edges NOTE: After performing this process on both sides of the component, four open set still remain. Selecting “Set 1” in the split line tree will highlight that the split line has an extra edge selected that is not required to create a closed loop around the component. Zoom into the area shown below to unmark the selected edge. Open Edges that need to be Unmarked to create closed loop Vcamtech Co., Ltd 9

VISI Modelling – Splitting At this point you will still have four open sets. Using the skills you have been shown up to this point investigate the open sets you have left and select the missing edges to create a single closed loop around the component. If succesful, joining the four open sets will produce a closed set and the split line tree will only display closed sets. With only closed sets inside the tree, we can select the ‘Analyse Face Sets’ icon to see the result of out split line. After selecting the ‘Analyse Face Sets’ icon the display inside the tree will now display only two face sets Double click on Set 1 to expand the tree Selecting “Open Edges” using the right hand mouse button will display the following menu : Using the Unmark option it is possible to remove the final two Open Edges. Select the Face Sets using the right hand mouse button and select the ‘Goureaud shading with outline’ from the context sensitive Menu : Vcamtech Co., Ltd 10

YT-1200 - YOUNG TECH Co., Ltd.