vero uk training material - VCAM TECH Co., Ltd

Objectives
VISI Mould - Slide Assembly Creation
Having now inserted the lifters we will move onto the creation of Slides. The Slides are
required to help mould the undercut features on the product and in this particular case we
have for slots in the side of the component that will be formed by the moving side cores.
For this task we will begin from the last completed stage of the training and it is required to
load the starter file as detailed below. Do not worry if you have not managed to complete
the previous training exercises as the starter file will bring you right up to the correct point
for this section.
NOTE :- You will require an updated GENERAL.MDB catalogue which is supplied with this
training example. It needs to be copied to the path :-
C:\VISI131\LIBRARY\COMMON\PARAM-NG\COMMON|MOULD\DB\GENERAL
Loading the File
Lets begin by opening the file required for this tutorial.
Select the File | Open command and select slide-start.wkf
Vcamtech Co., Ltd 1