vero uk training material - VCAM TECH Co., Ltd
vero uk training material - VCAM TECH Co., Ltd
vero uk training material - VCAM TECH Co., Ltd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Bushing For Guide Pillars<br />
VISI Mould - Tool Build Tutorial<br />
For the guide bush we will use the Hasco Z10 Guide Bush with Spigot, configured as<br />
shown below<br />
Guide Bush / Tube Dowels<br />
For the guide bush / tube dowels we will use the Hasco Z20 tube dowel configured as<br />
shown below. Make sure that the Alignment is set to a bottom position.<br />
Stop Buttons<br />
In this particular tool we will not be using Stop Buttons.<br />
Remove the “Tick” from the<br />
checkbox so that this<br />
component is not inserted.<br />
This checkbox will align the<br />
tube dowel to the bottom of<br />
the K11 plate<br />
Vcamtech <strong>Co</strong>., <strong>Ltd</strong> 10
Change language