Views
5 years ago

vero uk training material - VCAM TECH Co., Ltd

vero uk training material - VCAM TECH Co., Ltd

VISI Mould - Slide

VISI Mould - Slide Assembly Creation Configure the Slide with the parameters shown below. Initially all the values will be set to zero. Required Settings Initial Settings Core Layer Set Here is a summary of the parameters involved in creating the slide, they can be obtained by clicking the “Display Builder Bit Map” icon. “Display Builder Bit Map” icon will reveal the description of the parameter and their meanings. Vcamtech Co., Ltd 4

The Result VISI Mould - Slide Assembly Creation Here is what you should expect to see with the Slide in position behind the facing plate. Adding a Slide Wear Plate beneath the slide body. You will now need to pick the Slide where you want to insert the slide plate. Pick the Slide anywhere on its body. Select the SliderCore tab from the General catalogue Select the SLDPLATE from the General catalogue Slide shown in position Make sure the General catalogue is selected Vcamtech Co., Ltd 5