Living Image 3.1

Living Image ® Software User’s Manual
9. If necessary, click in the control panel to operate in single image mode.
NOTE
In single image mode, the button appears in the control panel. Click this
button to set up sequence acquisition. (For more details on setting up a sequence, see
page 21.)
10. When you are ready to acquire the image, click Acquire. During image acquisition,
the Acquire button becomes a Stop button. To cancel the acquisition, click Stop.
- The image window appears (Figure 3.3). If this is the first image of the session, you
are prompted to choose an autosave location.
11. To specify a folder for autosaved data, click Yes in the prompt and choose a folder
in the dialog box that appears.
- All images acquired during the session are automatically saved to this folder. You
can choose a different folder at any time (select Acquisition → Auto-Save on the
menu bar).
12. In the Edit Image Labels box that appears, enter information for the image label and
click OK (Figure 3.3). If you do not want to enter label information, click Cancel.
15