Living Image 3.1

Living Image ® Software User’s Manual
Moving an ROI There are two ways to move an ROI on an image:
• Drag the ROI to a new location
• Edit the settings in the ROI Properties box
NOTE
You cannot move ROIs created using the auto ROI feature.
To drag an ROI:
1. Put the mouse pointer over the
ROI so that it becomes a
arrow.
2. Drag the ROI.
3. Release the mouse button when
the ROI is properly positioned.
To move an ROI using the ROI Properties box:
1. Double-click the ROI in the image.
- The ROI Properties box appears and displays the
position and dimensions of the selected ROI.
2. To set ROI position, enter new Xc (pix) and Yc (pix)
values in the ROI Properties box.
3. To rotate the ROI clockwise, enter the degrees in the
Angle (deg) box and click outside the box.
4. To lock the current ROI position, choose the Lock
Position option.
Note: The ROI position cannot be changed until the
Lock Position option is cleared.
Position of the ROI selected in the image
85