Living Image 3.1

Living Image ® Software User’s Manual
3.10 Manually Saving Image Data
2. To mark the center of the camera in the window, put a check mark next to Display
CCD Center.
3. Select the size of the step increment that the stage moves: Coarse, Normal, or
Fine.
4. Click Up or Down to move the stage and change the focus.
5. If necessary, select another F/stop setting from the drop-down list and adjust the
light level using the arrows.
6. Click Update to apply the settings.
- The resulting focal plane (cm above the stage) is automatically entered in the
Subject height box.
7. Click OK when the image is focused.
When you acquire the first image(s) of a session, the autosave feature prompts you to
choose the folder where you want to save image data. During the session, all images
will be saved to this folder. You can change the autosave folder at any time (select
Acquisition → Auto-Save To on the menu bar). If you do not want to use the autosave
feature, you can manually save data.
1. Turn off the autosave feature: select Acquisition on the menu bar and remove the
check mark next to Auto Save.
2. After you acquire an image or image sequence, click the Save button .
Alternatively, select File → Save on the menu bar.
3. In the dialog box that appears, select a directory of interest and click OK.
NOTE
The software automatically includes the user ID, and a date and time stamp with the
data.
33