Download Adept Cobra PLC600 User's Guide - pulsar.com.tr
Download Adept Cobra PLC600 User's Guide - pulsar.com.tr
Download Adept Cobra PLC600 User's Guide - pulsar.com.tr
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Safety<br />
All personnel must observe sound safety practices during the installation, operation, and<br />
testing of all elec<strong>tr</strong>ically powered equipment. To avoid injury or damage to equipment,<br />
always remove power by disconnecting the AC power from the source before attempting<br />
any repair or upgrade activity. Use appropriate lockout procedures to reduce the risk of<br />
power being restored by another person while you are working on the system.<br />
WARNING: The user must get confirmation from every<br />
en<strong>tr</strong>usted person before they start working with the robot<br />
that the person:<br />
1. Has received the user’s guide.<br />
2. Has read the user’s guide.<br />
3. Understands the user’s guide and<br />
4. Will work in the manner specified by the user’s guide.<br />
2.12 Safety Equipment for Operators<br />
<s<strong>tr</strong>ong>Adept</s<strong>tr</strong>ong> advises operators to wear ex<strong>tr</strong>a safety equipment in the workcell. For safety<br />
reasons operators must wear the following when they are in the robot workcell.<br />
• Safety glasses<br />
• Protective headgear (hard hats)<br />
•Safety shoes<br />
Install warning signs around the workcell to ensure that anyone working around the<br />
robot system knows they must wear safety equipment.<br />
2.13 Protection Against Unauthorized Operation<br />
The system must be protected against unauthorized use. Res<strong>tr</strong>ict access to the keyboard<br />
and the Manual Con<strong>tr</strong>ol Pendant by locking them in a cabinet or use another adequate<br />
method to prevent access to them.<br />
2.14 Safety Aspects While Performing Maintenance<br />
Only skilled persons with the necessary knowledge about the safety and operating<br />
equipment are allowed to maintain the robot and PLC Server.<br />
WARNING: During maintenance and repair, the power to<br />
the robot and PLC Server must be turned off.<br />
Unauthorized third parties must be prevented from<br />
turning on power through the use of lockout measures.<br />
30 <s<strong>tr</strong>ong>Adept</s<strong>tr</strong>ong> <s<strong>tr</strong>ong>Cobra</s<strong>tr</strong>ong> <s<strong>tr</strong>ong>PLC600</s<strong>tr</strong>ong>/PLC800 Robot User’s <s<strong>tr</strong>ong>Guide</s<strong>tr</strong>ong>, Rev B