MX-M264N/M314N/M354N Operation-Manual GB

COPIER
COPYING SEQUENCE
This section explains the basic procedure for copying. Select settings in the order shown below to ensure that the copy
operation takes place smoothly.
For detailed procedures for selecting the settings, see the explanation of each setting in this chapter.
Place the original.
Place the original in the document feeder tray of the automatic
document feeder, or on the document glass.
* Depending on the copy functions used, there are also cases
where functions are selected before the original is placed.
Basic copy settings
Exposure
Auto
Copy Ratio
100%
Original
Auto
A4
1. A4
2. A4R
3. B4
4. A3
Paper Select
Auto
A4
Plain
Plain
A4
Special Modes
2-Sided Copy
Output
File
Quick File
Preview
Select the basic copy settings.
The main settings are as follows:
• Exposure and original type CHANGING THE EXPOSURE
AND ORIGINAL IMAGE TYPE (page 2-21)
• Copy ratio REDUCTION/ENLARGEMENT/ZOOM
(page 2-23)
• Original size ORIGINAL SIZES (page 2-27)
• Paper Settings PAPER TRAYS (page 2-11)
2-sided copy settings
2-Sided Copy
OK
Select settings as needed for 2-sided copying and 2-sided
scanning of the original.
AUTOMATIC 2-SIDED COPYING (page 2-16)
2-6
Contents