MX-M264N/M314N/M354N Operation-Manual GB

SYSTEM SETTINGS
Printer Settings
Item Factory default setting Page
Printer Settings 7-74
Default Settings 7-74
Prohibit Notice Page Printing Enabled 7-74
Prohibit Test Page Printing Disabled 7-74
A4/Letter Size Auto Change Varies depending on country and region 7-74
Print Density Level 3 7-74
Bypass Tray Settings 7-74
Enable Detected Paper Size in Bypass Tray Disabled 7-74
Enable Selected Paper Type in Bypass Tray Enabled 7-74
Exclude Bypass-Tray from Auto Paper Select Disabled 7-74
Job Spool Queuing* Enabled 7-74
Disabling of USB Memory Direct Print* Disabled 7-74
Disabling of Network Folder Direct Print* Disabled 7-74
Interface Settings 7-75
Hexadecimal Dump Mode* Disabled 7-75
I/O Timeout 60 sec. 7-75
Enable USB Port Enabled 7-75
USB Port Emulation Switching* Auto 7-75
Enable Network Port Enabled 7-75
Network Port Emulation Switching* Auto 7-75
Port Switching Method Switch at End of Job 7-75
* When the hard disk drive is installed.
Image Send Settings
Item Factory default setting Page
Image Send Settings 7-76
Operation Settings 7-76
Other Settings 7-76
Default Display Settings
• Hold settings for a while after scanning has been
completed
Scan (fax when fax is installed)
Disabled
7-76
Address Book Default Selection Tab Switch: ABC, Address Type: All 7-76
7-36
Contents