MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
(14) [Transaction Report] key
CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT (Transaction Report)
(page 4-97)
(15) [Own Name Select] key
TEMPORARILY CHANGING THE SENDER
INFORMATION (Own Name Select) (page 4-100)
(16) [Memory Box] key
SENDING A FAX WHEN ANOTHER MACHINE
POLLS YOUR MACHINE (Polling Memory)
(page 4-104)
(17) [Polling] key
CALLING A FAX MACHINE AND INITIATING
RECEPTION (Polling) (page 4-101)
* Does not appear when the automatic document feeder and the stamp unit are not installed.
Special modes can generally be combined with other special modes, however, there are some combinations that are not
possible. If a prohibited combination is selected, a message will appear in the touch panel.
[OK] key and [Cancel] key
In some cases two [OK] keys and one [Cancel] key will appear in the special mode screens. The keys are used as
follows:
Fax/Special Modes
OK
(A)
Erase
Cancel
OK
(B)
(C)
Edge
Erase
Centre
Erase
Edge+Centre
Erase
Edge
10 (0~20)
mm
Side Erase
(A) Enter the selected special mode setting and return to the base screen.
(B) Enter the selected special mode setting and return to the special modes menu screen. Touch this key when you
wish to continue selecting other special mode settings.
(C) During selection of special mode settings, this key returns you to the special modes menu screen without saving the
settings. When settings have been completed, this cancels the settings and returns you to the special modes menu
screen.
4-72
Contents