MX-M264N/M314N/M354N Operation-Manual GB

COPIER
4
Covers/Inserts
Front Cover Setting
Paper Tray
Bypass
Tray
A4
Plain
(3) (2) (1)
(4)
(A)
(B)
Cancel
Print on Front Cover
Yes
1-Sided
No
2-Sided
OK
Select cover settings.
(1) If the cover sheet will be copied on, touch
the [Yes] key. Otherwise, touch the [No]
key.
If the [No] key is touched, only cover insertion will be
performed.
In this case, go to step (3).
(2) To copy on one side of the cover, touch the
[1-Sided] key. To copy on both sides of the
cover, touch the [2-Sided] key.
(3) Select paper settings for the cover.
(A) The currently selected paper tray for the cover is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the cover, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the paper tray for the cover in the
tray selection screen and touch the [OK] key.
Covers/Inserts
Front Cover
OK
1. A4
2. A4R
Paper Tray
Plain
Plain
Bypass Tray
A4
Plain
3. B4
Plain
4. A3 Plain
(4) Touch the [OK] key.
If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied on, tab
paper can be inserted.
To cancel cover settings...
Touch the [Cancel] key.
Special Modes
Covers/Inserts
Cancel
OK
OK
If you wish to insert a back cover, touch
the [Back Cover] key.
5
Cover Setting
Front
Cover
Back
Cover
Insertion
Type A
Insertion
Type B
Inserts Setting
Insertion
Settings
The screen of step 4 appears. The procedures are the same as
for the front cover. Follow the procedures in step 4.
When following the procedures, substitute "Back Cover" for
"Front Cover".
Tray Settings
Page Layout
2-58
Contents