MX-M264N/M314N/M354N Operation-Manual GB

PRINTER
CONVENIENT PRINTER FUNCTIONS
USING TWO MACHINES TO PRINT A LARGE PRINT
JOB (Tandem Print)
This function requires the hard disk drive.
Two machines are required to use this function.
Tandem Print allows you to divide a large print job
between two machines connected to your network.
The machines simultaneously print each half of the job,
making it possible to shorten the printing time when
printing a large number of sets.
To use Tandem Print, the IP address of the slave
machine configured in "Tandem Connection Setting" in
the machine's system settings (administrator) must be
configured in the printer driver. In a Windows
environment, this can be accomplished automatically by
clicking the [Auto Configuration] button on the
[Configuration] tab of the printer driver. In a Macintosh
environment, this can be accomplished automatically by
clicking the [Tandem Settings] button.
Example: Printing 4 sets of copies
2 sets of
copies
2 sets of
copies
Windows
(This function can be used when the PS printer driver is used.)
(1) (2)
(1) Click the [Advanced] tab.
(2) Select the [Tandem Print] checkbox .
The tandem print function can be used only when the
printer driver is installed using a "Custom installation"
with "LPR Direct Print (Specify Address/Auto Search)"
and checking "Yes" for "Do you want to use 'Tandem
Print' function?"
Macintosh
(This function can only be used in Mac OS X.)
(2) (1)
(1) Select [Tandem Print].
(2) Select the [Tandem Print] checkbox .
To use the tandem print function, the protocol to be
used must be selected in accordance with the
message that appears in the left screen when adding
the printer driver with the "Printer Setup Utility".
3-52
Contents