MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
SENDING A LARGE NUMBER OF PAGES
(Job Build)
This function requires the automatic document feeder to be installed.
This function lets you separate an original consisting of numerous pages into sets, scan each set using the automatic
document feeder, and transmit the pages in a single transmission. Use this function when there are more original pages
than can be placed at once in the auto document feeder.
When scanning originals that are separated into sets, scan the set that has the first page first. The settings that you
select for the first set can be used for all remaining sets.
Originals
Originals are
scanned in
separate sets.
Transmission
1
1
1
101
Up to 999 pages can be scanned. Note that when the memory is being used for other jobs, fewer pages can be scanned.
1
Indicator line
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
2
Enter the destination fax number.
ENTERING DESTINATIONS (page 4-17)
(2)
(3)
Select job build mode.
Fax/Special Modes
OK
(1) Touch the [Special Modes] key.
SPECIAL MODES (page 4-71)
3
Program
Timer
Erase
2in1
Dual Page
Scan
Card Shot
1
2
(2) Touch the [Job Build] key so that it is
highlighted.
Job
Build
Mixed Size
Original
Slow Scan
Mode
(3) Touch the [OK] key.
Original
Count
File
Quick File
4-87
Contents