MX-M264N/M314N/M354N Operation-Manual GB

COPIER
Special Modes
OK
Touch the [Insertion Settings] key.
Covers/Inserts
Cancel
OK
6
Cover Setting
Front
Cover
Back
Cover
Insertion
Type A
Insertion
Type B
Inserts Setting
Insertion
Settings
Tray Settings
Page Layout
7
Covers/Inserts
Insertion Settings
Insertion Page
Insertion
Insertion
Type A Type B
10
Tray 1
A4
Plain
(1) (2)
(5)
Bypass
Tray
A4
Plain
Enter
OK
Insertion
Total:4
(A) (B) (3) (C)
Specify the pages where inserts A and B
will be inserted.
(1) Touch the [Insertion Type A] key or the
[Insertion Type B] key.
Specify the page where the highlighted insert will be
inserted.
(A) This shows the tray selected for insert type A and the
paper size and type.
(B) This shows the tray selected for insert type B and the
paper size and type.
When the [Insertion Type A] key is highlighted, the insert
sheet insertion settings are applied to [Insertion Type A].
When the [Insertion Type B] key is highlighted, the insert
settings are applied to [Insertion Type B].
(2) Enter the page number where the insert
sheet will be inserted with the numeric
keys.
For more information, see "Inserts (copying of 1-sided
originals)" (page 2-138) and "Inserts (copying of 2-sided
originals)" (page 2-138).
The [CLEAR] key ( ) can be pressed to return the
setting of the selected item to the default value. If you
make a mistake, press the [CLEAR] key ( ) and then
enter the correct number.
(3) Touch the [Enter] key.
(C) This shows the total number of inserts. Up to 100
insert sheets can be inserted. To insert multiple
inserts, touch the [Enter] key after entering each
insertion page number (insertion position) with the
numeric keys.
(4) To insert another insert sheet, repeat steps
(1) to (3).
(5) Touch the [OK] key.
If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied
on, tab paper can be inserted.
2-62
Contents