MX-M264N/M314N/M354N Operation-Manual GB

COPIER
Stamp
Page Numbering
Cancel
OK
To configure page number settings,
touch the [Page Number] key.
3
Page Numbering Format
1,2,3.. (1),(2),(3)..
-1-,-2-,-3-.. P.1,P.2,P.3..
Total Page
Auto
Manual
If you do not need to configure page number settings, go to
step 9.
,,..
1/5,2/5,3/5..
1 Page
Page Number
Stamp
Select page number settings.
Page Number
OK
(1) Touch the [Manual] key.
4
Auto
Manual
(1)
First Number
1
1
(2)
Last Number
Auto
Printing Starts from Page
Covers/Inserts
Counting
(2) Set the first number, the last number, and
the "Printing Starts from Page" number.
Touch each key and enter a number with the numeric
keys (1 to 999).
The [CLEAR] key ( ) can be pressed to return the
setting of the selected item to the default value. If you
make a mistake, press the [CLEAR] key ( ) and then
enter the correct number.
• A "Last Number" smaller than the "First Number" cannot be set.
• The "Last Number" is initially set to "Auto", which means that page numbers are automatically printed through the
last page based on the "First Number" and "Printing Start from Page" settings.
• If the "Last Number" is set to a number smaller than the "Total Pages", page numbers are not printed on pages after
the page set as the "Last Number".
• "Printing Starts from Page" is used to set the page number from which you want to begin printing page numbers.
For example, if "3" is set and 1-sided copying is being performed, page numbers will be printed beginning from the
3rd copy sheet (the 3rd original page). If 2-sided copying is being performed, page numbers will be printed
beginning from the front side of the 2nd copy sheet (the 3rd original page).
5
Stamp
Page Number
Auto
Manual
First Number
1
Last Number
Auto
OK
Covers/Inserts
Counting
If covers/inserts will be inserted, touch
the [Covers/Inserts Counting] key if you
want to include the covers/inserts in the
page number count and want page
numbers printed on the covers/inserts.
Printing Starts from Page
1
2-89
Contents