MX-M264N/M314N/M354N Operation-Manual GB

SCANNER/INTERNET FAX
Specifying the original scan size (by paper size)
If the original is a non-standard size or you wish to change the scan size, touch the [Original] key to specify the original
size manually. Place the original in the document feeder tray or on the document glass and follow the steps below.
1
Select the mode and display the image settings screen.
(1) Touch the tab of the mode that you wish to use.
(2) Touch the [Original] key.
The automatically detected original size appears to the right of the [Original] key.
IMAGE SETTINGS (page 5-53)
Scan/Original
OK
Touch the [Scan Size] key.
2
Scan Size
Auto A4
100%
Send Size
Auto
Image Orientation
2-Sided
Booklet
2-Sided
Tablet
(1)
(2)
Specify the scan size.
Scan/Original
Auto
Manual
A5
Manual
B5R
B4
AB
OK
(1) Touch the appropriate original size key.
When the document cover is installed, the [Long size] key
is not displayed.
(2) Touch the [OK] key.
A5R
A4
A3
Inch
3
B5
216x340
Size Input
A4R
216x343
Long Size
• If you are sending a long original, touch the [Long Size] key. Use the automatic document feeder to scan a long
original. The maximum width that can be scanned is 1000 mm (39-3/8") (the maximum height is 297 mm (11-5/8")).
TRANSMITTABLE ORIGINAL SIZES (page 5-17)
• To specify an Inch size for the scan size, touch the [AB Inch] key to highlight the [Inch] side and then specify the
scan size.
Scan/Original
OK
Touch the [OK] key.
4
Scan Size
B5
100%
Send Size
Auto
Image Orientation
2-Sided
Booklet
2-Sided
Tablet
When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed. In addition, when only scan
destinations are selected for scan transmission or metadata transmission, scanning will take place in Mono2.
5-56
Contents