MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
2
5 10 15
Condition
Settings
Address Review
Address Entry
Global
Address Search
Sub Address
Sort Address
Preview
To
AAA AAA
CCC CCC
EEE EEE
GGG GGG
III III
(3), (5)
Cc
BBB BBB
DDD DDD
FFF FFF
HHH HHH
JJJ JJJ
(2)
Freq. ABCD EFGH IJKL MNOP QRSTU VWXYZ etc.
1
2
Enter the destination fax number.
(1) Touch the [Address Book] key in the base
screen.
(2) Touch the one-touch key of the desired
destination.
If the destination is not stored in the address book, enter
the fax number with the numeric keys.
If the sub-address and passcode are stored in the one-touch
key, the following sub-steps are not necessary. Go to step 3.
(3) Touch the [Sub Address] key.
"/" appears.
(4) Enter the sub-address with the numeric
keys.
(5) Touch the [Sub Address] key.
"/" appears.
(6) Enter the passcode with the numeric keys.
If a passcode has been omitted in the memory box of the other machine, (5) and (6) are not necessary.
3
Press the [START] key.
Your machine will call the other machine and initiate reception of the fax.
• Polling multiple machines (serial polling) is not possible.
• F-code polling reception can be used in combination with a timer setting. Only one polling reception operation with a timer
setting can be stored at a time.
SENDING A FAX AT A SPECIFIED TIME (Timer) (page 4-79)
To cancel polling...
Touch the [Polling] key in the screen of step 1 so that it is not highlighted.
4-116
Contents