MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
SPECIFYING THE SCAN SIZE AND SEND SIZE
(Enlarge/Reduce)
When the original is placed, its size is automatically detected and displayed in the base screen.
The size of the placed original is indicated as the scan size, and the size to be transmitted is indicated as the send size.
Scan
Internet Fax
Fax
USB Mem. Scan
PC Scan
Address Book
Original
Scan:
Auto
A4
Send:
Auto
Direct TX
Exposure
Auto
Sub Address
Resolution
Standard
Address Review
Special Modes
File
Quick File
Preview
Auto Reception
Fax Memory:100%
In the above screen, the scan size (the placed original) is A4 (8-1/2" x 11") and the send size is auto. If, for example, the
scan size were A4 (8-1/2" x 11") and the send size were B5 (5-1/2" x 8-1/2"), the image would be reduced before
transmission.
"Scan Size"
"Send Size" is set to
B5 (5-1/2" x 8-1/2")
Transmission
A4 (8-1/2" x 11")
The image is reduced
to B5 (5-1/2" x 8-1/2")
before transmission
• Only standard original sizes can be automatically detected.
STANDARD SIZES (page 4-29)
• When the original size is a non-standard size, or if the size is not detected correctly, manually specify the original scan
size.
Specifying the original scan size (by paper size) (page 4-49)
Specifying the original scan size (by numerical values) (page 4-51)
4-48
Contents