MX-M264N/M314N/M354N Operation-Manual GB

COPIER
CHECKING COPIES BEFORE PRINTING
(Proof Copy)
This function requires the hard disk drive.
This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked
for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to
settings were required. However, this feature makes it possible to change settings for the scanned original without
scanning it again, allowing you perform copying more efficiently.
"Proof Copy" is
selected and 5 sets of
copies are executed
AAA
1 set of copies is
printed for you to
check
AAA
If OK
The remaining 4
sets are printed
AAA AAA
AAA AAA
Adjust the
settings
AAA
If OK
AAA AAA
AAA AAA
After adjustments are
made, 1 set is printed
for you to check
The remaining 4 sets
are printed
1
2
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Select copy settings in the base screen.
(3)
(2)
(4)
Select Proof Copy.
Special Modes
OK
(1) Touch the [Special Modes] key.
SPECIAL MODES (page 2-38)
3
Stamp
File
Image Edit
Quick File
Sharpness
Proof Copy
2
2
(2) Touch the keys to switch through the
screens.
Original
Count
Mixed Size
Original
Slow Scan
Mode
(3) Touch the [Proof Copy] key so that it is
highlighted.
(4) Touch the [OK] key.
2-110
Contents