MX-M264N/M314N/M354N Operation-Manual GB

FACSIMILE
(1) (A)
(B)
(2)
Specify the original size.
Fax/Special Modes
OK
(1) Enter the original size.
4
Card Shot
X
Y
86
54
Y
(25~210)
mm
(25~210)
mm
Cancel
Fit to
Send Size
Size Reset
OK
• Touch the X (width) numeric value display key and
enter the width.
• Touch the Y (height) numeric value display key and
enter the height.
(A) To return the original size to the default size, touch
the [Size Reset] key.
(B) To automatically enlarge or reduce the image size to
the send size, touch the [Fit to Send Size] key. Do not
touch this key if you wish to scan the original at the
original size that you entered.
(2) Touch the [OK] key.
X
• You can also touch the keys to change the number.
• The send size is automatically selected based on the original size you entered.
• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the
send size. In this case, the screen of step 3 appears when you touch the scan size key. For the procedure for
setting the send size, see "Specifying the send size of the original" (page 4-53).
5
Press the [START] key to scan the front of the card.
To cancel scanning...
Press the [STOP] key ( ).
Turn the card over so that the back is face down, and press the [START] key to
scan the back of the card.
6
Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.
To cancel scanning...
Press the [STOP] key ( ).
4-85
Contents