MX-M264N/M314N/M354N Operation-Manual GB

SCANNER/INTERNET FAX
Scan
Address Book
(1) (2)
Internet Fax
Fax
Original Scan:
USB Mem. Scan
Auto A4 Send:
PC Scan
Auto
Switch to Internet fax mode and display
the image settings screen.
(1) Touch the [Internet Fax] tab.
Address Entry
Send Settings
Exposure
Resolution
Auto
200X100dpi
(2) Touch the [Original] key.
Address Review
File Format
TIFF-F
3
File
Quick File
Preview
Special Modes
I-Fax Manual
Reception
The current settings for [Original], [Exposure], [Resolution], and [File Format] are indicated at the right of each key. To
change a setting, touch the appropriate key.
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original) (page 5-54), SPECIFYING
THE ORIGINAL SCAN SIZE AND SEND SIZE (Enlarge/Reduce) (page 5-55), CHANGING THE EXPOSURE
AND ORIGINAL IMAGE TYPE (page 5-61), CHANGING THE RESOLUTION (page 5-63), CHANGING THE FILE
FORMAT (page 5-64), SPECIAL MODES (page 5-71)
4
Internet Fax/Original
2-Sided
Booklet
Scan Size
Auto A4
2-Sided
Tablet
100%
(1) (2)
OK
Send Size
Auto
Image Orientation
Specify the orientation in which the
original is placed.
When specifying the orientation of the image to be transmitted,
specify the orientation of the original placed in step 1.
(1) Touch the appropriate orientation key.
If the top edge of the original is up, touch the key. If
the top edge of the original is to the left, touch the
key.
(2) Touch the [OK] key.
You will return to the screen of step 2.
The original orientation is initially set to
necessary.
. If the original was placed with the top edge up, this step is not
5
Press the [START] key.
Scanning begins.
• If the original is placed on the document glass, the [Read-End] key appears in the touch panel. If the original is only one page,
go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission
will take place.
6
If the original was placed on the document glass, replace it with the next original
and press the [START] key.
Repeat until all originals have been scanned.
5-42
Contents