MX-M264N/M314N/M354N Operation-Manual GB

SYSTEM SETTINGS
System Settings (Administrator) List
The system settings that appear following administrator login are shown below. The default setting for each item is also shown.
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
• For information on the general settings, see "System Settings (General) List" (page 7-6).
• For explanations of settings related to the fax function, see "SYSTEM SETTINGS FOR FAX" (page 7-98).
User Control
Item Factory default setting Page
User Control 7-46
User Authentication Setting 7-46
User Authentication Disabled 7-46
Authentication Method Setting
Authenticate a User by Login Name
and Password
7-46
Device Account Mode Setting Disabled 7-46
Other Settings 7-47
Actions when the Limit of Pages for Output Jobs
Job is Completed even when the Limit
of Pages is Reached
7-47
The Number of User Name Displayed Setting 12 7-47
A Warning when Login Fails Disabled 7-47
Disabling of Printing by Invalid User Disabled 7-47
Automatically print stored jobs after login Disabled 7-47
Default Network Authentication Server Setting – 7-47
Perform LDAP server access control. Disabled 7-48
Display Usage Status after Login – 7-49
User Information Print – 7-49
User List – 7-50
Page Limit Group List – 7-52
Authority Group List – 7-53
Favourite Operation Group List* 1 – 7-56
Favourite Operation Group Registration* 1 – 7-56
My Menu List* 1 – 7-57
User Count – 7-58
Card area settings – 7-59
Card type/Reader settings – 7-59
Card Setting* 2 – 7-59
Card Reader Device Registration – 7-59
*1 This cannot be set on the machine. Set this in "User Control" in the Web pages.
*2 When the HID card reader is available.
7-30
Contents