MX-M264N/M314N/M354N Operation-Manual GB

COPIER
4
Covers/Inserts
Insertion Type A Settings
Paper Tray
Bypass
Tray
A4
Plain
(3) (2) (1)
(4)
(A)
(B)
Cancel
Print on Insert Sheets
Yes
1-Sided
No
2-Sided
OK
Select insert settings.
(1) If the insert will be copied on, touch the
[Yes] key. Otherwise, touch the [No] key.
If the [No] key is touched, only insert sheet insertion will
be performed.
In this case, go to step (3).
(2) To copy on one side of the insert, touch the
[1-Sided] key. To copy on both sides, touch
the [2-Sided] key.
(3) Select insert paper settings.
(A) The currently selected paper tray for the insert is
displayed.
(B) The size and type of paper in the currently selected
tray is displayed.
To change the paper tray for the inserts, touch the "Paper
Tray" key.
When the "Paper Tray" key is touched, a tray selection
screen appears. Select the desired paper tray in the tray
selection screen and touch the [OK] key.
Covers/Inserts
Insertion Type A
OK
1. A4
2. A4R
Paper Tray
Plain
Plain
Bypass Tray
A4
Plain
3. B4
Plain
4. A3 Plain
(4) Touch the [OK] key.
If both sides of the insert will be copied on, label sheets, transparency film, and tab paper cannot be used. If not copied
on, tab paper can be inserted.
Special Modes
Covers/Inserts
Cover Setting
Cancel
Inserts Setting
OK
OK
If you wish to insert a different type of
insert sheet, touch the [Insertion Type B]
key.
5
Front
Cover
Back
Cover
Insertion
Type A
Insertion
Type B
Tray Settings
Insertion
Settings
Page Layout
The screen of step 4 appears. Settings are selected in the
same way as for insert type A. Follow the procedures in step 4.
When following the procedures, substitute "Insert Type B" for
"Insert Type A".
2-61
Contents