MX-M264N/M314N/M354N Operation-Manual GB

COPIER
CHECKING INFORMATION ON A COPY JOB WAITING
IN THE QUEUE
Detailed information can be displayed on a copy job waiting in the queue.
1
JOB STATUS
Press the [JOB STATUS] key.
(1) (2)
Checking job details
Print Job
Scan to
Fax Job
Internet Fax
(1) Touch the [Print Job] tab.
1
2
3
4
Job Queue
Copy
Sets / Progress
020 / 001
Status
Copying
Spool
Job Queue
Copy 002 / 000 Waiting
1 Complete
Computer01 002 / 000 Waiting
1
0312345678 001 / 000 Waiting
Detail
Priority
Stop/Delete
(3) (4)
(2) Change the print job status mode to [Job
Queue].
Touch this key to change modes. The selected mode will
be highlighted.
(3) Touch the key of the job that you wish to
check.
(4) Touch the [Detail] key.
The job check screen of the job selected in (3) appears.
Detail
OK
2
Copy 002 / 000 Waiting
Colour / B/W: Mono2
2-Sided
Copy:
Exposure: 1 3 5
Output:
Paper:
A4
Plain
Paper Select
Special
Modes:
Copy Ratio: X100% Y100%
[Paper Select] key
If a copy job is stopped because the paper ran out, the [Paper Select] key can be pressed to change to a
different paper tray.
When the [Paper Select] key is pressed, the paper tray selection screen appears.
PAPER TRAYS (page 2-11)
Touch the key of the tray that has the size of paper that you wish to use and then touch the [OK] key. The
stopped copy job will resume.
2-129
Contents