MX-M264N/M314N/M354N Operation-Manual GB

COPIER
2-Sided Copy
(1) (2)
OK
Select the 2-sided copy mode.
(1) Touch the [1-Sided to 2-Sided] key.
(2) Touch the [OK] key.
3
Binding
Change
• When the document cover is installed, the [2-Sided to 2-Sided] key and the [2-Sided to 1-Sided] key is not
displayed.
• The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.
4
Exposure
Auto
Copy Ratio
100%
Original
Auto
A4
1. A4
2. A4R
3. B4
4. A3
Plain
A4
Paper Select
Auto
A4
Plain
Special Modes
2-Sided Copy
Output
File
Quick File
Preview
Check the paper to be used.
Make sure that the desired paper (tray) is selected.
• To change the paper (tray), touch the [Paper Select] key.
PAPER TRAYS (page 2-11)
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Special Modes
7
Set the number of copies (number of
sets) with the numeric keys.
5
Plain
A4
2-Sided Copy
• Up to 999 copies (sets) can be set.
• A single copy can be made even if "0" appears for the number of copies.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
6
7
Press the [START] key.
Scanning begins.
Remove the original and place the next original, and then press the [START] key.
Repeat this step until all originals have been scanned.
2-19
Contents