MX-M264N/M314N/M354N Operation-Manual GB

COPIER
COPYING A LARGE NUMBER OF
ORIGINALS AT ONCE (Job Build)
This function requires the automatic document feeder to be installed.
When copying a very large number of originals, this function allows you to divide the originals into sets and feed each
set through the automatic document feeder one set at a time.
Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the
maximum number that can be inserted.
This function is convenient when you wish to sort copies of a large number of originals into multiple sets. Because all
originals are copied as a single job, you are saved the trouble of sorting the copies that would be required if the originals
were divided into separate copy jobs.
When scanning originals in sets, divide the sheets so that no set has more than the number of paper that can be loaded,
and then scan from the set with the first page. The settings that you select for the first set can be used for all remaining
sets.
Sorting the copies of a large number of originals into 2 sets
Originals
1
Originals are
scanned in
separate sets
1
1
1
101
Indicator line
Insert the originals face up in the
document feeder tray.
1
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
(2)
(3)
Select Job Build.
2
Special Modes
Margin Shift
Pamphlet Copy
Erase
Job
Build
Dual Page
Copy
Tandem
Copy
OK
1
2
(1) Touch the [Special Modes] key.
SPECIAL MODES (page 2-38)
(2) Touch the [Job Build] key so that it is
highlighted.
Covers/Inserts
Book Copy
Transparency
Inserts
Tab Copy
Multi Shot
Card Shot
(3) Touch the [OK] key.
You will return to the base screen of copy mode.
2-50
Contents